F-400DD-RG
Register die-cutting machine with integrated printing station capabilities.

* Images and technical schematics are for illustrative purposes. Final machine configuration is tailored to client specifications.
It's official. The first machine has been built and delivered. This was done in collaboration with a customer who also wanted a printing station on it. This printing station is based on a Gallus EM-410 platform. Unfortunately, this will not be possible in the future. This machine is a register die-cutting machine that can also varnish. The die-cutting units are similar to the K&B units developed for a Gallus EM 410. To do all this properly, we collaborated with both the customer and Lenze. The customer's patience and communication helped us enormously. The customer's input also had a positive effect on the machine. Ask about the possibilities to get your machine where you, as a future customer, would like it to get it.
Technical Specifications
- Compressed Air
- 6 Bar (Dry) 1000 M3
- Electric
- 400VAC 32 AMP
- Mechanical Speed
- Up to 200m/min
- Knife Station
- 5 crush cut knives (Optional: Shearer/Auto)
- Webguide
- BST
- Unwinder
- 1 meter
- Rollift Diameter
- 76 mm
- Die-Station
- Similar to K&B Units
- Format
- Z-96 to Z-168
- Rewind
- Single shaft 76mm (Optional Double / Semi Turret)
WANT TO SEE THE F-400DD-RG IN ACTION?
Contact us for a detailed demonstration, sample testing with your substrates, or a custom production estimate.